I want to confirm the configuration for TrendMicro ServerProtect 6.0 running on ONTAP 9.1. I had been told by NetApp support that I need a LIF in each protected SVM for EVERY node in the cluster. This would mean that my 8-node cluster running two (2) SVMs would require 16 LIFs - each with its own IP address. I tend to think that the TSE may have misspoken here. According to documentation, it appears I can provide only the cluster Mgmt LIF to the AV connector LIF config applet and that would cover ALL SVMs in the cluster. Otherwise, I'll end up with something like this... 16 IPs used for AV Scanning (??)
Isn't this why we have failover-groups to begin with?
Logical Status Network Current Current Is
Vserver Interface Admin/Oper Address/Mask Node Port Home
----------- ------------------- ---------- ------------------ ------------- ------- ----
CIFS07EUS
CIFS07EUS_cifs_lif1 up/up 10.1.82.226/24 CINTAPP01eUS a0a-82 true
CIFS07EUS_cifs_lif2 up/up 10.1.82.228/24 CINTAPP02eUS a0a-82 true
CIFS07EUS_cifs_lif3 up/up 10.1.82.229/24 CINTAPP03eUS a0a-82 true
CIFS07EUS_cifs_lif4 up/up 10.1.82.230/24 CINTAPP04eUS a0a-82 true
CIFS07EUS_cifs_lif5 up/up 10.1.82.231/24 CINTAPP05eUS a0a-82 true
CIFS07EUS_cifs_lif6 up/up 10.1.82.232/24 CINTAPP06eUS a0a-82 true
CIFS07EUS_cifs_lif7 up/up 10.1.82.236/24 CINTAPP07eUS a0a-82 true
CIFS07EUS_cifs_lif8 up/up 10.1.82.237/24 CINTAPP08eUS a0a-82 true
CIFS08EUS
CIFS08EUS_cifs_lif1 up/up 10.1.82.234/24 CINTAPP01eUS a0a-82 true
CIFS08EUS_cifs_lif2 up/up 10.1.82.238/24 CINTAPP02eUS a0a-82 true
CIFS08EUS_cifs_lif3 up/up 10.1.82.239/24 CINTAPP03eUS a0a-82 true
CIFS08EUS_cifs_lif4 up/up 10.1.82.240/24 CINTAPP04eUS a0a-82 true
CIFS08EUS_cifs_lif5 up/up 10.1.82.241/24 CINTAPP05eUS a0a-82 true
CIFS08EUS_cifs_lif6 up/up 10.1.82.242/24 CINTAPP06eUS a0a-82 true
CIFS08EUS_cifs_lif7 up/up 10.1.82.243/24 CINTAPP07eUS a0a-82 true
