Hello,
We have a system that has to be in takeover as users cannot access 10.20.4.12 on NetApp-Controller-SR2. The system needs to always be in takeover or access to this share does not work. I am looking at the ifconfig -a for each node but I cannot see anything:
NetApp-Controller-SR2
e0a: flags=0x2f0c866<BROADCAST,RUNNING,MULTICAST,TCPCKSUM> mtu 1500
ether 00:a0:98:14:a4:92 (auto-1000t-fd-up) flowcontrol full
e0b: flags=0x2f0c866<BROADCAST,RUNNING,MULTICAST,TCPCKSUM> mtu 1500
ether 00:a0:98:14:a4:93 (auto-1000t-fd-up) flowcontrol full
e2a: flags=0x89f0e867<BROADCAST,RUNNING,MULTICAST,TCPCKSUM,VLAN> mtu 9000
ether 02:a0:98:14:a4:92 (auto-10g_sr-fd-up) flowcontrol full
trunked VIF1
e2b: flags=0x8970e867<BROADCAST,RUNNING,MULTICAST,TCPCKSUM,VLAN> mtu 9000
ether 02:a0:98:14:a4:92 (auto-unknown-down) flowcontrol full
trunked VIF1
c0a: flags=0x170e866<BROADCAST,RUNNING,MULTICAST,TCPCKSUM> mtu 1500
ether 00:a0:98:14:a4:94 (auto-unknown-enabling) flowcontrol full
c0b: flags=0x170e866<BROADCAST,RUNNING,MULTICAST,TCPCKSUM> mtu 1500
ether 00:a0:98:14:a4:95 (auto-unknown-enabling) flowcontrol full
e0M: flags=0x2b0c866<BROADCAST,RUNNING,MULTICAST,TCPCKSUM,MGMT_PORT> mtu 1500
ether 00:a0:98:14:a4:96 (auto-100tx-fd-up) flowcontrol full
e0P: flags=0x2b4c867<UP,BROADCAST,RUNNING,MULTICAST,TCPCKSUM,ACP_PORT> mtu 1500 PRIVATE
inet 192.168.0.117 netmask 0xfffffc00 broadcast 192.168.3.255 noddns vFiler ID: 0
ether 00:a0:98:14:a4:97 (auto-100tx-fd-up) flowcontrol full
lo: flags=0x1b48049<UP,LOOPBACK,RUNNING,MULTICAST,TCPCKSUM> mtu 9188
inet 127.0.0.1 netmask 0xff000000 broadcast 127.0.0.1 vFiler ID: 0
losk: flags=0x40a400c9<UP,LOOPBACK,RUNNING> mtu 9188
inet 127.0.20.1 netmask 0xff000000 broadcast 127.0.20.1 vFiler ID: 0
VIF1: flags=0xa2f0e862<BROADCAST,RUNNING,MULTICAST,TCPCKSUM,VLAN> mtu 9000
ether 02:a0:98:14:a4:92 (Enabled interface groups)
VIF1-6: flags=0x2b4e863<UP,BROADCAST,RUNNING,MULTICAST,TCPCKSUM> mtu 9000
inet 10.20.16.81 netmask 0xffffff00 broadcast 10.20.16.255 vFiler ID: 0
partner VIF1-6 (not in use)
ether 02:a0:98:14:a4:92 (vlan-on-ifgrp-up)
VIF1-1: flags=0x2b4e863<UP,BROADCAST,RUNNING,MULTICAST,TCPCKSUM> mtu 1500
inet 10.20.4.12 netmask 0xfffff000 broadcast 10.20.15.255 vFiler ID: 0
partner VIF1-1 (not in use)
ether 02:a0:98:14:a4:92 (vlan-on-ifgrp-up)
NetApp-Controller-SR1
e0a: flags=0x2f0c866<BROADCAST,RUNNING,MULTICAST,TCPCKSUM> mtu 1500
ether 00:a0:98:14:9d:02 (auto-1000t-fd-up) flowcontrol full
e0b: flags=0x2f0c866<BROADCAST,RUNNING,MULTICAST,TCPCKSUM> mtu 1500
ether 00:a0:98:14:9d:03 (auto-1000t-fd-up) flowcontrol full
e2a: flags=0x89f0e867<BROADCAST,RUNNING,MULTICAST,TCPCKSUM,VLAN> mtu 9000
ether 02:a0:98:14:9d:02 (auto-10g_sr-fd-up) flowcontrol full
trunked VIF1
e2b: flags=0x8970e867<BROADCAST,RUNNING,MULTICAST,TCPCKSUM,VLAN> mtu 9000
ether 02:a0:98:14:9d:02 (auto-unknown-down) flowcontrol full
trunked VIF1
c0a: flags=0x170e866<BROADCAST,RUNNING,MULTICAST,TCPCKSUM> mtu 1500
ether 00:a0:98:14:9d:04 (auto-unknown-enabling) flowcontrol full
c0b: flags=0x170e866<BROADCAST,RUNNING,MULTICAST,TCPCKSUM> mtu 1500
ether 00:a0:98:14:9d:05 (auto-unknown-enabling) flowcontrol full
e0M: flags=0x2b0c866<BROADCAST,RUNNING,MULTICAST,TCPCKSUM,MGMT_PORT> mtu 1500
ether 00:a0:98:14:9d:06 (auto-100tx-fd-up) flowcontrol full
e0P: flags=0x2b4c867<UP,BROADCAST,RUNNING,MULTICAST,TCPCKSUM,ACP_PORT> mtu 1500 PRIVATE
inet 192.168.2.158 netmask 0xfffffc00 broadcast 192.168.3.255 noddns vFiler ID: 0
ether 00:a0:98:14:9d:07 (auto-100tx-fd-up) flowcontrol full
lo: flags=0x1b48049<UP,LOOPBACK,RUNNING,MULTICAST,TCPCKSUM> mtu 9188
inet 127.0.0.1 netmask 0xff000000 broadcast 127.0.0.1 vFiler ID: 0
losk: flags=0x40a400c9<UP,LOOPBACK,RUNNING> mtu 9188
inet 127.0.20.1 netmask 0xff000000 broadcast 127.0.20.1 vFiler ID: 0
VIF1: flags=0xa2f0e862<BROADCAST,RUNNING,MULTICAST,TCPCKSUM,VLAN> mtu 9000
ether 02:a0:98:14:9d:02 (Enabled interface groups)
VIF1-6: flags=0x2b4e863<UP,BROADCAST,RUNNING,MULTICAST,TCPCKSUM> mtu 9000
inet 10.20.16.80 netmask 0xffffff00 broadcast 10.20.16.255 vFiler ID: 0
partner VIF1-6 (not in use)
ether 02:a0:98:14:9d:02 (vlan-on-ifgrp-up)
VIF1-1: flags=0x2b4e863<UP,BROADCAST,RUNNING,MULTICAST,TCPCKSUM> mtu 1500
inet 10.20.4.11 netmask 0xfffff000 broadcast 10.20.15.255 vFiler ID: 0
partner VIF1-1 (not in use)
ether 02:a0:98:14:9d:02 (vlan-on-ifgrp-up)
I see that this is part of Vif1 on controller 2 with a VLAN tag of 1
VIF1-1: flags=0x2b4e863<UP,BROADCAST,RUNNING,MULTICAST,TCPCKSUM> mtu 1500
inet 10.20.4.12 netmask 0xfffff000 broadcast 10.20.15.255 vFiler ID: 0
partner VIF1-1 (not in use)
ether 02:a0:98:14:a4:92 (vlan-on-ifgrp-up)
===Vif details ====
default: transmit 'IP Load balancing', Ifgrp Type 'multi_mode', fail 'log'
VIF1: 1 link, transmit 'none', Ifgrp Type 'single_mode' fail 'default'
Ifgrp Status Up Addr_set
up:
e2a: state up, since 30Dec2022 09:22:56 (00:11:22)
mediatype: auto-10g_sr-fd-up
flags: enabled
input packets 34576, input bytes 2305844
output packets 496, output bytes 64549
output probe packets 0, input probe packets 0
strike count: 0 of 10
up indications 2, broken indications 1
drops (if) 0, drops (link) 0, drops (no active link) 0
indication: up at 30Dec2022 09:22:56
consecutive 682, transitions 3
broken:
e2b: state broken, since 30Dec2022 09:23:06 (00:11:12)
mediatype: auto-unknown-down
flags:
input packets 0, input bytes 0
output packets 0, output bytes 0
output probe packets 0, input probe packets 0
strike count: 0 of 10
up indications 0, broken indications 0
drops (if) 0, drops (link) 0, drops (no active link) 0
indication: broken at 30Dec2022 09:23:06
consecutive 0, transitions 1
======
Am I correct in thinking it is single mode so only 1 link can be active ?
I am sure it is config but i find it strange it works in takeover but not on its own.
Any advise would be appreciated